Fyne Audio Vintage Five
€4,499.00
No longer available
Product information "Fyne Audio Vintage Five"
Wie seine größeren Geschwister zelebriert dieses kompakte 5-Zoll-Bücherregaldesign die Gehäusepracht traditioneller Lautsprecher neben der hochmodernen Audiotechnik von Dr. Paul Mills. Die handgefertigten Gehäuse des Fyne Vintage Five sind kompakt gehalten, um eine einfache Integration in kleine und mittelgroße Räume zu ermöglichen. Mit dem Motto „Keine Kompromisse“ als Leitmotiv der Vintage-Serie verfügt der Vintage Five über alle Audio-Fortschritte seiner größeren Geschwister, darunter einen 125-mm-IsoFlare-Treiber (5 Zoll) mit FyneFlute-Rollsicke und hochmodernem BassTrax abwärts -Feueröffnungssystem und handgefertigte tiefkryogen behandelte Frequenzweichen. Mit einem Hauch von Klasse in der integrierten Presence-Steuerung zur weiteren Verfeinerung des Klangs an Ihre Hörumgebung ist der Vintage Five ein mutiges Statement in einem kompakten Gehäuse.
Technische Daten
| System Type | 2 way, downwards firing port, with BassTrax Tractrix diffuser |
| Recommended amplifier power (Watt RMS) | 30 - 100 |
| Peak power handling (Watt) | 200 |
| Continuous power handling (Watt RMS) | 50 |
| Sensitivity (2.83 Volt @ 1m) | 87dB |
| Nominal impedance | 8 Ohm |
| Frequency response (-6dB typical in room) | 46Hz - 38kHz |
| Drive unit complement | 1 x 125mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 19mm magnesium dome compression tweeter, neodymium magnet system |
| Crossover frequency | 1.9kHz |
| Crossover type | Single wired passive low loss, 2nd order low pass, 1st order high pass. Deep Cryogenically Treated |
| System adjustments | Presence (2.5kHz - 5.0kHz) +/- 3dB |
| Dimensions - HxWxD | 350 x 219x 260mm (13.8 x 8.6 x 10.2”) |
| Weight - Each | 6.2kg |
Login
Safety information:
- Avoid operating speakers at maximum volume for long periods of time to avoid hearing damage and equipment damage.
- Make sure speaker cables are routed securely and do not pose a tripping hazard. Use cable ducts or ties.
- Keep speakers away from water and moisture to prevent damage and short circuits.
- Place speakers in a stable position and make sure they cannot tip over or fall.
- Only use speakers in the environment they are intended for. Outdoors, only use speakers that are specifically designed for outdoor use to avoid weather and water damage.
- Further warnings and safety information can be found in the operating instructions, which can be downloaded from the manufacturer's website.
Manufacturer: Fyne Audio Ltd., No. 1 Cubitt Court, Belgrave Street, Bellshill, North Lanarkshire, ML4 3NP- UK - steven.scott@fyneaudio.com
Authorized Representative: Steven Scott, Sales Coordinator, 0044 (0)141428 4008 - steven.scott@fyneaudio.com
