Skip to main content Skip to search Skip to main navigation
Go to homepage

Piega Coax 611 Autumn Bronze

Product information "Piega Coax 611 Autumn Bronze"

Die PIEGA Coax 611 ist ein schlanker 3-Wege-Standlautsprecher der Coax Gen2 Serie. Das C112+ Koaxialbändchen, zwei 160-mm-UHQD-Tieftöner und drei Passivmembranen sorgen für eine präzise, natürliche und dynamische Wiedergabe mit kräftigem Bass. Das massive Aluminiumgehäuse mit TIM2-Technologie reduziert störende Gehäuseresonanzen.

  • C112+ Koaxialbändchen für präzise Mittel- und Hochtonwiedergabe
  • Zwei 160-mm-UHQD-Tieftöner mit drei Passivmembranen
  • 3-Wege-Standlautsprecher mit Frequenzgang bis 50 kHz
  • Nahtloses Aluminiumgehäuse mit TIM2-Technologie
  • 90 dB Empfindlichkeit und bis zu 250 Watt Verstärkerleistung

Technische Daten

Bauprinzip 3-Wege-System Standlautsprecher
Empfohlene Verstärkerleistung 20 13250 W
Empfindlichkeit 90 dB/W/m
Impedanz 4 Ohm
Frequenzgang 32 Hz 13 50 kHz
Bestückung 2 × 160 mm UHQD-Tieftöner, 3 × 160 mm UHQD Passivmembranen, 1 × C112+ Koaxialbändchen
Gehäuse Aluminium-Strangpressprofil mit Tension Improve Module 2 (TIM2)
Abmessungen (H × B × T) 117 × 21 × 31 cm
Gewicht 45 kg
Ausführungen Silber, Schwarz, Weiß sowie verschiedene Sonderfarben

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Information on product safety

Safety information:

  • Avoid operating speakers at maximum volume for long periods of time to avoid hearing damage and equipment damage.
  • Make sure speaker cables are routed securely and do not pose a tripping hazard. Use cable ducts or ties.
  • Keep speakers away from water and moisture to prevent damage and short circuits.
  • Place speakers in a stable position and make sure they cannot tip over or fall.
  • Only use speakers in the environment they are intended for. Outdoors, only use speakers that are specifically designed for outdoor use to avoid weather and water damage.
  • Further warnings and safety information can be found in the operating instructions, which can be downloaded from the manufacturer's website.

Manufacturer: PIEGA SA, Bahnhofstrasse 29, CH-8810 Horgen - mail@piega.ch
Authorized Representative: Manuel Neitzel, Wiesenweg 14, DE-23684 Scharbeutz - mn@piega.de