Pro-Ject Stereo Box DS3 Schwarz
€899.00
In stock - ready for immediate dispatch - delivery time 1-3 days **
We can also recommend these products
Buy together with
Product information "Pro-Ject Stereo Box DS3 Schwarz"
• NEU 2x 150 Watt pro Kanal an 4 Ohm
• NEU BLUETOOTH® V5.0 - aptX, aptX HD, A2DP Profile
• NEU Pro-Ject Fernbedienung im neuen Stil
• Analoge Lautstärkeregelung mit Motor-Potentiometer
• Dual-Mono-Design
• 3x RCA Line Ausgänge
• Kopfhörerausgang 2 x 450 mW bei 32 Ohm
• Fixer und variabler Ausgang
• Trigger Ein- & Ausgang
• Vergoldete RCA-Anschlüsse
• Phono-Eingang – MM- und MC-fähig
• Schweres Aluminiumgehäuse schützt vor Störungen
• Magnetische Holzseitenteile separat erhältlich
Technische Daten
| Verstärkerleistung | 2x 150W / 80W bei 4/8 Ohm (1%THD) |
| Frequenzgang 20Hz - 20kHz | - 0,1 dB bis +0,3 dB |
| Rauschabstand | >98dB (105 dB - ‚A‘ gewichtet) bei 1kHz |
| Kanaltrennung | -73dB bei 10kHz |
| THD | < 0,01% bei 10W |
| Phono-Eingangsverstärkung | MM 40dB / MC 60dB |
| Phono-Empfindlichkeit | MM 47k Ohm / MC 100 Ohm |
| Analoge Eingänge | 3 Paar RCA (Sensitivität: 860 mV) |
| Line-Eingangsimpedanz | 50 kOhm |
| BLUETOOTH | V5.0; aptX, aptX HD, A2DP profile |
| Varliabler/Fixer Line-Out | 1 Paar RCA / 1 Paar RCA |
| Lautsprecheranschüsse | 4mm Ø Bananenstecker, Flach- stecker oder Draht |
| Netzgerät | 36V/5,5A DC |
| Standby Leistungsaufnahme | <0.5 W Standby |
| Maße B x H x T (mm) | 206 x 71 x 211 (223 mit Buchsen) |
| Gewicht | 1800g ohne Netzteil |
Login
Safety information:
- Always check that the mains voltage of the socket matches the voltage indicated on the device before plugging it in.
- Make sure that electronic devices are well ventilated and do not overheat. Do not place them on soft surfaces such as beds or pillows that could block the ventilation slots.
- Keep electronic devices away from water and damp environments to avoid short circuits and electric shocks. Do not use them near sinks, bathtubs or other water sources.
- Regularly check the cords and sockets of your devices for damage or wear. Do not use devices with damaged cords or loose sockets.
- Always switch off and unplug electronic devices before cleaning them. Do not use liquid cleaning agents or sprays directly on the device. Use a slightly damp cloth instead.
- Only use rechargeable batteries and batteries recommended by the manufacturer. Do not overcharge them or expose them to extreme temperatures. Dispose of old or damaged batteries properly and not in household waste.
- Further warnings and safety information can be found in the operating instructions, which can be downloaded from the manufacturer's website.
Manufacturer: Audio Tuning Vertriebs GmbH, Pro-Ject Headquarter, Wirtschaftspark A5, Analogweg 1, AT-2130 Mistelbach - support@project-audio.com
