Preise inkl. MwSt. zzgl. Versandkosten
Lagernd - sofort versandbereit **
1 Plattenbürste gratis zu jedem Plattenspieler ab einem Kaufpreis von € 199,00. Einfach im Warenkorb auswählen.
- Artikel-Nr.: 027494
A new, high-performance standard for belt-drive analog turntables
The TN-3B is a stylish, sleek-looking belt-driven turntable with a built-in MM-type PHONO EQ amplifier and USB digital output.
It employs a new tonearm with knife-edge, pivot-point bearings, co-developed with SAEC, the high-end tonearm manufacturer, for superlative stability and resolution.
The belt-drive mechanism, meanwhile, helps mitigate any unwanted cogging effects (ie fine pulsing) from the operation of the motor, to ensure a precise and smooth platter rotation.
The TN-3B also employs a high-precision NJM8080 op-amp in its in-built Phono EQ amplifier, allowing the user to enjoy the sound of their vinyl records with low distortion and in high quality. In addition, a built-in Analog-to-Digital converter and USB port allow users to digitise their vinyl libraries on their PC/Mac.
The TN-3B delivers a natural and well-balanced sound quality and is quick and easy to set up and start enjoying. We believe it sets a new standard that will satisfy the needs of both audiophiles and ardent record collectors.
- 2-speed, belt-drive turntable offering 33-1/3 and 45 rpm speeds
- Knife-edge, pivot-point tonearm designed by high-end tonearm manufacturer SAEC
- Static-balanced, S-shaped tone-arm with pre-installed audio-technica AT-VM95E MM cartridge
- Die-cast aluminum platter
- USB digital output for digital archiving on PC/Mac
- PHONO/LINE analog outputs (switchable)
- Built-in PHONO EQ amplifier, compatible with MM-type cartridges
- Hi-fi grade NJM8080 op-amp used in PHONO EQ stage
Motor DC Motor
Rotation speed 33-1/3rpm, 45rpm
Wow and flutters less than 0.1%
Signal-to-Noise ratio 67dB (A-weighted,20KHz LPF)
Platter Die-cast aluminium, 30cm diameter
Type Static-balanced, S-shape with knife-edge bearings
Effective tone-arm length 223mm
Anti-skating mechanism Supported
Stylus pressure range 0 to 5g
Compatible cartridge weight 3.0g to 12g
14g to 23g (incl. head-shell)
Type VM-series (Moving Magnet-type)
Output voltage 4.0mV (1kHz, 5cm/sec.)
Stylus pressure range 1.8g to 2.2g (2.0g recommended)
Cartridge weight 6.1g
Head-shell weight 11g (incl. screws, nuts, and wires)
Stylus life approx. 300 hours (depending on conditions)
Connectors RCA output x 1 pair (gold-plated)
PHONO EQ THRU 4.0mV (1kHz, 5cm/sec.)
PHONO EQ ON 224mV (-13dBV)
Connector USB B-type (FULL-SPEED) x 1
(DC 5V 500mA supply required)
Sampling frequency 8k / 11.025k / 16 k/ 22.05k / 32k / 44.1k / 48kHz
Bit depth 16-bit
Power AC 100V to 240V, 50/60Hz
Power consumption less than 1.5W
Standby power less than 0.5W
GND terminal Fitted
Operating temperature range 5? to 35?
Overall dimensions 420 x 117 x 356mm / 16.5 x 4.6 x 14.0 (dust cover closed)
420 x 381 x 402mm / 16.5 x 15.0 x 15.8 (dust cover opened)
Weight approx.5.0Kg / 11.0 lbs.
Felt mat x1
EP adapter x1
Headshell (with AT-VM95E pre-installed) x1
Dust cover x
Rubber feet for dust cover x2
RCA audio cable x1
AC Adapter (GPE053A-V120050) x1
Owners manual (incl. Warranty) x1