€990.00*
% €999.00* -0.9%In stock - ready for immediate dispatch
Product information "Pro-Ject Stereo Box RS Silber"
Stereo Box RS: Durch und durch audiophiler Vollverstärker
Dieser rein analoge Vollverstärker ist eine konsequente Umsetzung unseres Prinzips "Weniger ist mehr". Er bietet 6 analoge Eingänge, 5 davon RCA & 1 XLR, mit konsequenten Doppelmonoaufbau im gesamten Signalweg. Wenn zusätzlich digitale Quellen angeschlossen werden sollen, ist die DAC Box RS die ideale Zusatzkomponente und es stehen dann insgesamt 14 analoge & digitale Eingänge für die perfekte Wiedergabe bereit!
Stereo Box RS kann sowohl als Vollverstärker, wie auch als Vorverstärker verwendet werden, auch ein eigener Subwooferausgang ist vorhanden.
Rein analoge Schaltungen mit sehr rauscharmen Eingangsstufen garantieren kompromisslose Audioqualität. Elegant schlichte Bedienelemente auf der Gerätefront und die beigepackte IR-Fernbedienung machen die Bedienung zum Vergnügen. Das massive Metallgehäuse ist zeitlos schlicht und schützt die empfindliche Elektronik vor äußeren Einflüssen. Stereo Box RS ist sowohl silbern und schwarz erhältlich.
- 2x 120 Watt @ 4 Ohm
- 2 Ohm laststabil
- Rein analoge Schaltung
- Vollsymmetrischer Doppel-Mono-Aufbau
- 6 Stereo Hochpegeleingänge (XLR & RCA)
- Pre & Subwoofer & Ausgang mit fixem Pegel (Rec-Out)
- Röhren-Eingangsstufe (6922)
- Motor-Potentiometer
- IR Fernbedienung im Lieferumfang
- Hochwertiges Vollmetallgehäuse
Upgrade-Option:
Das separat erhältliche Linear-Netzteil Power Box RS Amp (VK EUR 499,00) verhilft zu mehr Verstärkerleistung (2x 100/195 Watt 8/4 Ohm) und 1-Ohm Laststabilität.
Ausgangsleistung: | 2x 80W / 120W bei 8 / 4 Ohm |
Rauschabstand: | > -95dB (IEC -D) |
Frequenzbereich: | 20Hz - 20kHz (+0dB, -0,08dB) |
THD: | 0,05% / 100 Watt |
Verstärkung: | 32dB (RCA) / 35dB (XLR) |
Stereo Line Eingänge: | 5 Paar RCA/Cinch Buchsen und 1 Paar XLR |
Ausgangsimpedanz: | 0,022 Ohm |
Subwooferanschluss: | 1x RCA (mono) |
Rec-Ausgang: | Stereo RCA (fixer Pegel) |
Lautsprecheranschluss: | 4mm Ø Bananas, Spades oder blanke Kabelenden |
Netzteil: | 48V/2,5A DC;100 - 240V, 50/60Hz |
Standby Verbrauch: | < 1 Watt |
Abmessungen (B x H x T): | 206 x 72 x 200 (220mm mit Buchsen) |
Login
Safety information:
- Always check that the mains voltage of the socket matches the voltage indicated on the device before plugging it in.
- Make sure that electronic devices are well ventilated and do not overheat. Do not place them on soft surfaces such as beds or pillows that could block the ventilation slots.
- Keep electronic devices away from water and damp environments to avoid short circuits and electric shocks. Do not use them near sinks, bathtubs or other water sources.
- Regularly check the cords and sockets of your devices for damage or wear. Do not use devices with damaged cords or loose sockets.
- Always switch off and unplug electronic devices before cleaning them. Do not use liquid cleaning agents or sprays directly on the device. Use a slightly damp cloth instead.
- Only use rechargeable batteries and batteries recommended by the manufacturer. Do not overcharge them or expose them to extreme temperatures. Dispose of old or damaged batteries properly and not in household waste.
- Further warnings and safety information can be found in the operating instructions, which can be downloaded from the manufacturer's website.
Manufacturer: Audio Tuning Vertriebs GmbH, Pro-Ject Headquarter, Wirtschaftspark A5, Analogweg 1, AT-2130 Mistelbach - support@project-audio.com