Van den Hul The Integration Hybrid XLR 1,2m Stereo Paar

WiiM Pro PlusMusik-Streamer neu definiert All-in-One-Streamer mit überragender Klangqualität, sodass kein externer DAC erforderlich ist.Erweiterte ADC-Integration, ideal für Vinyl-Liebhaber, die einen erstklassigen analogen Eingang suchen.Nahtloses Multiroom-Streaming über AirPlay 2, Chromecast, Alexa oder andere WiiM-Geräte.

The MX-VYNL is a fully balanced, very high performance phono stage, able to operate with virtually any moving coil or moving magnet cartridge. With both traditional RCA inputs and our unique XLR fully balanced connection the MX-VYNL can be connected to 2 turntables simultaneously. The MX-VNYL offers a wide range of input impedance settings for moving coil cartridges as well as several capacitance settings for moving magnet units. Unlike many of our competitors units the MX-VYNL allows easy adjustment of these settings while playing. This allows easy experimentation and tuning to find the optimum setting for all your equipment. The MX-VYNL also includes our renowned RIAA correction that offers extremely accurate results to beyond 80kHz. That may sound extreme, but there is a good deal of information above 20 kHz that needs correction. If it isn't corrected, it will show itself as ringing and overshoot. With both extraordinarily low noise and exceptional overload margin the MX-VYNL can comfortably handle even the most demanding of cartridges and satisfy the most discerning of listeners. Technische Daten: Output4 Volts RMS single ended from RCA sockets 8 Volts RMS balanced from XLR sockets PerformanceFrequency response: RIAA +-0.1dB IEC +-0.1dB MMChannel separation: < -86dB SNR A-wtd: < -101dB THD: < 0.007% XLR input: 5mV / 2.5mV selectable 70mV max (23dB headroom) MCChannel separation: < -83dB SNR A-wtd: < -98dB THD: < 0.01% XLR input: 0.8mV / 0.4mV selectable, 12mV max (24dB headroom) InputsBalanced Mini-XLR, RCA 1 pair RCA sockets OutputsBalanced XLR male sockets EIA Standard RS-297-A, RCA 1 pair RCA sockets PowerConnector: 1.3mm pin DC power jack Outboard power supply: 12V/500mA DC Mains voltages 100-240VAC 50-60Hz universal worldwide supply Consumption < 8 watts Weight (unpacked / packed): 1.9Kg / 2.4 Kg Dimensions W H D220 mm, 53 mm, 215 mm Included accessoriesMains adaptor, Manual

Der Anthra W15 Subwoofer wurde entwickelt, um knackige Bässe auch in sehr großen Räumen zu liefern. Er verfügt über eine leistungsstarke 1.500 Watt Class-D-Endstufe, die einen 15" (38 cm) Hochleistungstreiber aus C-CAM mit Rigid Surface Technology II (RST II) antreibt. Der W15 kann allein oder in Kombination mit bis zu drei anderen Anthra-Subwoofern kombiniert werden und liefert ein wahrhaft beeindruckendes, ultradynamisches Hörerlebnis. Auf der Rückseite befindet sich ein LCD-Farbdisplay und ein Drehregler, der die grundlegende Einrichtung des Subwoofers und die Auswahl von EQ-Presets ermöglicht, während erweiterte Funktionen wie die DSP-Konfiguration und die Einrichtung der Multi-Sub-Konnektivität über die MaestroUnite-App verfügbar sind. Hauptmerkmale 1x 15" (38 cm) Hochleistungstreiber aus keramikbeschichtetem Aluminium-Magnesium (C-CAM) und Rigid Surface Technology II (RST II) für einen extrem sauberen Bass 1.500 Watt Class-D-Endstufe garantiert, dass der Treiber unabhängig von der Lautstärke jederzeit mit optimaler Leistung versorgt wird Massiver Motoraufbau und größere, rundgewickelte, zweilagige Schwingspulen aus kupferbeschichtetem Aluminiumdraht (CCAW) sorgen für präzise Kontrolle bei extrem niedrigen Frequenzen 2-Zoll-LCD-Farbdisplay mit Drehregler für Menüauswahl und Grundeinstellungen RCA-Eingänge (links/rechts - linker Anschluss ist gleichzeitig LFE) RCA-Ausgänge ermöglichen die Verbindung von bis zu 4 Anthra-Subwoofern XLR-Eingänge als Anschlussmöglichkeit bei professionellen Installationen XLR-Ausgänge ermöglichen die Verbindung von bis zu vier Anthra-Subwoofern In Schwarz Hochglanz und Weiß Seidenmatt erhältlich Das MaestroUnite-Setup für Monitor-Audio-Anthra-Subwoofer ermöglicht dem Benutzer eine vollständige maßgeschneiderte Einrichtung. Verfügbar zum Download im App Store und bei Google Play. Technische Daten Gehäusekonzept Aktiv - Geschlossenes Gehäuse Treiberbestückung 1x 381 mm (15") Hochleistungstreiber mit Dreifachaufhängung Verstärkerklasse Hocheffiziente Class-D-Endstufe Untere Grenzfrequenz -6dB @16Hz Obere Grenzfrequenz (LPF Aus) -6 dB @ 400 Hz Treiberauslenkung (Spitze zu Spitze) 50 mm DSP 28 Bit 50 MIPS, konfigurierbar via MaestroUnite Analog-Digital-Wandlung Autoranging-Eingang, der einen maximalen Eingang von 10 Vrms mit geringem Signal-Rausch-Verhältnis für kleine Signale kombiniert Verstärkerleistung (240 Vac) Impuls: 2.500 Watt*Kontinuierlich: 1.400 Watt** Verstärkerleistung (120 Vac) Impuls: 2.500 WattKontinuierlich: 1.400 Watt LED UI Control Helligkeit, An-Aus Phasenkontrolle 0-360 Grad gemessen ab Tiefpassfilter-Übergabefrequenz Tiefpassfilter 20 - 200Hz LPF mit regelbarem Rollof von -3 bis -48 dB/Oktave Equalizer Konfigurierbar via MaestroUnite; 3 voreingestellte EQ-Kurven plus 3 benutzerdefinierbare EQ-Kurven, jede mit 8-Band-Custom-EQ-Unterstützung (Peaking, High Shelf, Low Shelf, High Pass) Lautstärkeregelung Breit einstellbare Eingangsverstärkung für maximale Ausgangsleistung bei einer Vielzahl von Eingangssignalen Eingänge Stereo-RCA unsymmetrisch (oder Mono/LFE mit nur dem mit LFE gekennzeichneten Anschluss) Mono/LFE symmetrisch XLR Ausgänge Unsymmetrische Stereoausgänge mit ungepuffertem Durchsatz von RCA-EingängenMono/LFE symmetrische XLR-Ausgänge mit ungepuffertem Durchgang vom XLR-Eingang Stromversorgung Universalanschluss, 85-265 VAC Gehäusemaße (ohne Füße) (H x B x T) 439 x 439 x 439 mm Leistungsaufnahme 550 Watt Gehäusekonstruktion Verstrebtes 25 mm starkes MDF mit 36 mm Frontschallwand Bespannung Magnetisch befestigte Gitter mit Stoffbezug Gewicht 35.41 kg

Dehnbarer Netz-Kabelkanal mit Zipp Universelles Netzdesign 3-5cm dehnbar Flexibel und individuell Maschen als Ausgangsoption nutzbar Ideal für PC, HIFI & TV Auch für Laptop-Trafos geeignet Dual Zipper - öffnet an beiden Seiten für komfortable Monatge Kein Hitzestau bei Netzgeräten - schwer entflammbar Hochwertige, geruchsneutrale Materialien Länge 1 Meter

The very first member of our very own state-of-the-art Fusion Series. It 19s a triple-shielded audio interconnect suitable for both balanced and unbalanced uses. The Integration Hybrid 19s design is based on our worldwide acclaimed D 13 102 III Hybrid. Having integrated all our experience, knowledge and technology into this first Fusion Series cable, it seemed logical to call it: The Integration Hybrid. As with all products under our Fusion Series, our newly developed highly advanced Fusion conductor material is combined with our well-proven Linear Structured Carbon ® (LSC) technology. The Integration Hybrid features: The cable exhibits an extremely pure and natural sound. The cable 19s low parasitic capacitance presents a low load to the signal source so long runs can be used. The cable 19s internal star quad configuration and its triple shielding render it highly immune to noise. The cable is mechanically very robust: Its 1CFusion Technology 1D conductors are strong and are much less susceptible to breakage due to frequent bending than the standard found copper. Its rugged and hardwearing Hulliflex ® jacket furthermore forms excellent protection. The main characteristics of Fusion Technology: Our Fusion Technology conductor material is an amorphous alloy of Copper, Zinc and Silver blended in specific proportions. By smartly combining these three rather soft metals, the final structure is definitely 1Charder 1D than can be expected from each of the metals individually. With our Fusion Technology, we have designed a metal conductor material with the following characteristics: A low electrical resistance due to enough free electrons per volume unit A high internal resistance against metal deformation A very high internal resistance against metal displacement A completely amorphous structure free from intercrystalline boundaries

The very first member of our very own state-of-the-art Fusion Series. It 19s a triple-shielded audio interconnect suitable for both balanced and unbalanced uses. The Integration Hybrid 19s design is based on our worldwide acclaimed D 13 102 III Hybrid. Having integrated all our experience, knowledge and technology into this first Fusion Series cable, it seemed logical to call it: The Integration Hybrid. As with all products under our Fusion Series, our newly developed highly advanced Fusion conductor material is combined with our well-proven Linear Structured Carbon ® (LSC) technology. The Integration Hybrid features: The cable exhibits an extremely pure and natural sound. The cable 19s low parasitic capacitance presents a low load to the signal source so long runs can be used. The cable 19s internal star quad configuration and its triple shielding render it highly immune to noise. The cable is mechanically very robust: Its 1CFusion Technology 1D conductors are strong and are much less susceptible to breakage due to frequent bending than the standard found copper. Its rugged and hardwearing Hulliflex ® jacket furthermore forms excellent protection. The main characteristics of Fusion Technology: Our Fusion Technology conductor material is an amorphous alloy of Copper, Zinc and Silver blended in specific proportions. By smartly combining these three rather soft metals, the final structure is definitely 1Charder 1D than can be expected from each of the metals individually. With our Fusion Technology, we have designed a metal conductor material with the following characteristics: A low electrical resistance due to enough free electrons per volume unit A high internal resistance against metal deformation A very high internal resistance against metal displacement A completely amorphous structure free from intercrystalline boundaries

The very first member of our very own state-of-the-art Fusion Series. It 19s a triple-shielded audio interconnect suitable for both balanced and unbalanced uses. The Integration Hybrid 19s design is based on our worldwide acclaimed D 13 102 III Hybrid. Having integrated all our experience, knowledge and technology into this first Fusion Series cable, it seemed logical to call it: The Integration Hybrid. As with all products under our Fusion Series, our newly developed highly advanced Fusion conductor material is combined with our well-proven Linear Structured Carbon ® (LSC) technology. The Integration Hybrid features: The cable exhibits an extremely pure and natural sound. The cable 19s low parasitic capacitance presents a low load to the signal source so long runs can be used. The cable 19s internal star quad configuration and its triple shielding render it highly immune to noise. The cable is mechanically very robust: Its 1CFusion Technology 1D conductors are strong and are much less susceptible to breakage due to frequent bending than the standard found copper. Its rugged and hardwearing Hulliflex ® jacket furthermore forms excellent protection. The main characteristics of Fusion Technology: Our Fusion Technology conductor material is an amorphous alloy of Copper, Zinc and Silver blended in specific proportions. By smartly combining these three rather soft metals, the final structure is definitely 1Charder 1D than can be expected from each of the metals individually. With our Fusion Technology, we have designed a metal conductor material with the following characteristics: A low electrical resistance due to enough free electrons per volume unit A high internal resistance against metal deformation A very high internal resistance against metal displacement A completely amorphous structure free from intercrystalline boundaries