€0.00
On order - delivery time on request (usually approx. 14 days)**
Promotion only for a short time
Buy together with
previously €211.00
Product information "Ortofon 2MR Mono"
Alle Tonabnehmer der 2MR Serie sind um 4mm niedriger als die der 2M Serie!
Tretet ein in eine Ära der Authentizität mit eurem 2MR Mono-Tonabnehmer, der sorgfältig mit einer Stylus-Spitze ausgestattet ist, die einen R 18µm sphärisch, nackten Diamanten aufweist, um perfekt den Feinheiten beim Abspielen von Mono-Mikrorillen-LP-Schallplatten gerecht zu werden. Taucht in die authentische Nostalgie von Mono-Schallplatten ein, die mit dem 2M Mono zum Leben erweckt wird.
Euer Ortofon 2MR Mono besitzt ein speziell entworfenes Tonabnehmergehäuse, das auf Plattenspieler und Tonarme wie Rega abgestimmt ist und deren Anspruch an niedrige Bauhöhe erfüllt.
Durch sein schmales Gehäuse könnt ihr es nahtlos und ohne zusätzliche Modifikationen oder Abstandshalter unter dem Tonarm montieren, sodass nur zwei Schrauben für eine schnelle und einfache Installation erforderlich sind.
Technische Daten
| Tonabnehmer-Typ: | MM (Moving-Magnet) |
| Ausgangsspannung: | 4mV |
| Verstärkeranschluss: | Phono MM/47kOhm |
| Kanalabweichung bei 1 kHz: | - |
| Übersprechdämpfung bei 1kHz: | - |
| Übersprechdämpfung bei 15kHz: | - |
| Frequenzbereich: | 20 - 20.000Hz |
| Frequenzgang: | 20 - 20.000Hz +3/-1dB |
| Abtastfähigkeit bei 315Hz: | 70µm |
| Nadelnachgiebigkeit: | 18µm/mN |
| Abtastdiamant: | Nude Sphärisch |
| Verrundung: | R 18 µm |
| Auflagekraftbereich: | 16-20mN (1,6-2,0g) |
| empf. Auflagekraft: | 18mN (1,8g) |
| Abtastwinkel: | 20 Grad |
| Gleichstromwiderstand: | 0,7kOhm |
| Induktivität: | 350mH |
| empf. Abschlusswiderstand: | 47kOhm |
| empf. Abschlusskapazität: | 150-300pF |
| Gewicht: | 7,2g |
| Ersatz-Nadeleinschub: | 2M Mono |
0 of 0 reviews
Average rating of 0 out of 5 stars
Login
Safety information:
- Keep HiFi accessories out of the reach of children and pets to avoid injury and damage.
- Keep HiFi accessories away from water and moisture to prevent damage and short circuits.
- If the accessory requires batteries to operate, always use the batteries recommended by the manufacturer to ensure that the accessory works properly and no damage occurs.
- Only use accessories recommended by the manufacturer to ensure compatibility and to avoid damage to the device
- Further warnings and safety information can be found on the manufacturer’s website.
Manufacturer: Ortofon A/S, Stavangervej 9, DK-4900 Nakskov - support@ortofon.dk